BOSS Air/Power — Edmonton
Equipment from one vendor,install from another, parts from a third.
A compressor or power unit is only useful once it's installed, wired in and supported — and that shouldn't take three different vendors and three different phone calls. Mach 6 is a BOSS Air/Power distributor: the product, the application advice, the installation, the parts and the service, all from the same shop.
- 48 hrs
- Inspection results from scheduled booking — guaranteed
- 24 hrs
- Written estimate after diagnosis — parts & labour itemized
- 150 km
- Mobile service radius around Edmonton — the shop comes to the unit
Proof of capability
Capability you can check before you commit
Mach 6 is an authorized CVIP inspection station and Sennebogen's authorized service provider, working out of a 40,000 sq. ft. Edmonton facility with overhead cranes, a dedicated heavy-duty alignment bay and the diagnostic tooling to confirm a fault instead of guessing at it.
What Mach 6 handles
BOSS Air/Power at Mach 6
- BOSS air and power products supplied as a distributor
- Application advice for the unit and the duty cycle
- Installation carried out in our bays
- Parts support and replacement components
- Service and diagnosis on installed systems
- Fleet supply for operations standardizing on one product line
Supply, install, support
Product, application advice, installation and ongoing service all run through the same shop and the same phone number.
Air & generation products
Partnering to provide customers' air / generation needs
Mach 6 is proud to partner with BOSS Air and offer their high quality line of air / generator product lines.
Whether you require air application or generator, or both, BOSS Air is the right choice to satisfy all your product needs. With air and generator products with a wide variety of applications, BOSS Air provides the necessary utility for many industries including fire & rescue, telecommunications, transport, insulation as well as many more. Keeping in mind the specifics for each and every industry application, the versatility of BOSS Air products provides a number of possible variations for use in each specific case scenario.
Mechanx Series portable gas combo units
Delivering compressor, generator, and more depending on your requirements. When comparing portable units for a wide variety of industry use cases, BOSS Air is the clear choice.
Two Stage Two Cylinder Portable Gas setup providing the required Compressor/Generator/Welder/Charging/Jumpstarter. BOSS Air provides longstanding quality and dependability and here at Mach 6 we back this with parts and service to keep your products running their best for the long haul.
BOSS Air diesel generators
Diesel-powered generator built for continuous duty, with a Cummins Tier 4 Final engine and the same reinforced frame and serviceability BOSS Air is known for.
- Cummins 3.8L Tier 4 Final engine — meets 2019 emission requirements, legal for sale in Canada. Diesel exhaust catalyst, no DEF required.
- Triple cooler package — engine radiator, compressor cooler, charged air cooler; easily removed for cleaning.
- Full Shift polypropylene 40-gallon fuel tank — easily removable for installation through a 42" door.
- Powder coated reinforced steel frame with adjustable mounting locations.
- Easy access to all major engine service points: oil filter, fuel filter, fuel pump, oil dip stick.
PTO underdeck systems — custom & comprehensive underdeck applications
Underdeck systems are designed for utility, regardless of industry application. Having a heavy kit to maximize for your application, or a low key setup which is tidily hidden from view, BOSS Air has a wide berth of products and variations to suit you and your business.
When it comes to rotary screw compressors, BOSS Air is your first choice. All underdeck systems are designed for maximum performance in a form factor for customer satisfaction every time.
- Optional PTO and hydraulic pump
- B-CAN — mounting location is your choice
- Air/oil manifold
- Rotary screw compressor
- Oil separation tank
BOSS Infinity hydraulic-driven systems
BOSS® Infinity and other hydraulic driven systems have advanced designs allowing you options such as adjustable hydraulic flow to the compressor. For times when you need that extra boost, you have it.
Installation is simple too. Just bolt the unit to the deck of your vehicle, connect your hydraulic system, add your hydraulic motor, wire to a 24vdc source and it's ready.
Standard equipment features
- Integrated compressor oil cooling package with automatic thermal sensing control to ensure proper operating temperatures
- Hydraulic motor (optional) directly coupled to geared air end
- Replaceable spin-on compressor lubricant filter with safety bypass and 25-micron rating
- Two-stage, dry-type air intake filter with replaceable element and gravity evacuator
- Instrumentation to include: hour meter, compressor lubricant temperature gauge and air pressure gauge
- Integrated receiver tank with filler port and drain hose with JIC plug
- All components are frame mounted, plumbed and wired
- Safety devices included: minimum pressure device, compressor lubricant high temperature and high-pressure safety system, automatic blowdown device, high-pressure relief valve and necessary warning and information decals
- Optional hydraulic system oil cooling packages available upon request (recommended)
- 16 gauge steel powdered coated enclosure
- SAE C 4-bolt flange standard
- Two-year or lifetime warranty on air end available
How the process works
Four steps, same order, every time
Same sequence whether it's one unit or a fleet program — that's what makes the 48-hour and 24-hour commitments something we can actually hold.
Send the part or the problem
A part number works. So does a photo of the failed component and the unit it came off.
We source it
Distributor lines first, OEM and premium aftermarket where that's the better call for the application.
Fit it or ship it
Install it in our bays with the diagnostics to back it up, or get it to your shop.
Keep it stocked
Recurring PM kits and fleet stocking so the next one is already on the shelf.
Every job leaves here with a record: what was inspected, what was found, what was approved and what was done. That record is what turns a repair into a maintenance history you can plan against.
Customer proof
Do you install what you sell?
Yes. Supply, install and support all sit here, which is why an application question and a warranty question go to the same phone number.